How to Put On a Dog Harness: A Simple Step-by-Step Guide

A well-fitted harness can make everyday walks more comfortable and secure for both you and your dog. But just as important as choosing the right size is making sure the harness is worn correctly.

If the straps are too loose, your dog may be able to slip out. If they are too tight or positioned too close to the front legs, they may rub against the skin and restrict natural movement.

Follow this simple guide to help your dog get a comfortable, secure fit.

Step 1 — Place the Harness Under Your Dog

Ask your dog to stand naturally on a flat surface.

Open the harness completely and place it underneath your dog, making sure the straps are not twisted. Position the main section around the chest and girth area.

Keeping your dog standing during fitting will give you a more accurate idea of how the harness will sit during walks.

Step 2 — Bring Both Sides Up

Gently bring both sides of the harness upward along your dog's body.

Check that the straps sit evenly on both sides and that no fur or skin is caught underneath them.

The harness should follow the natural shape of your dog's chest without pulling to one side.

Step 3 — Guide the Strap Through the Center Loop

Locate the center loop or connection point on the harness.

Guide the strap through the loop and make sure it lies flat against your dog's body.

Avoid twisting the webbing, as twisted straps may create pressure points and make the harness uncomfortable during longer walks.

Step 4 — Bring the Straps Toward the Neck

Guide the straps forward and position them comfortably around the upper chest and neck area.

The harness should sit below the throat rather than pressing directly against it.

Your dog should still be able to turn their head, walk, sit and move naturally without restriction.

Step 5 — Check the Position Behind the Front Legs

This is one of the most important parts of the fit.

The girth strap should sit slightly behind the front legs instead of directly inside the underarm area.

Leaving a little space helps reduce rubbing and gives your dog's shoulders and front legs enough room to move freely.

Step 6 — Tighten and Secure the Harness

Fasten the buckle and adjust each strap until the harness feels secure but comfortable.

A useful rule is the two-finger test: you should be able to slide approximately two fingers between the harness and your dog's body.

If you can fit significantly more than two fingers underneath, the harness may be too loose. If you cannot comfortably fit two fingers, loosen the straps slightly.

Before Every Walk

Before attaching the leash, take a few seconds to check the fit again.

Make sure:

  • All buckles are fully secured.
  • The straps are lying flat and are not twisted.
  • The harness is not rubbing behind the front legs.
  • Your dog can move their shoulders freely.
  • The harness cannot easily slip over the head or body.
  • You can comfortably fit two fingers beneath the straps.

Your dog's body shape can also change over time, so it is worth checking the adjustment regularly—especially for puppies, growing dogs or dogs whose weight has recently changed.

A Better Fit Makes a Better Walk

The right harness should feel secure without getting in the way of your dog's natural movement.

Take a little time when fitting it for the first time, let your dog walk around indoors, and make small adjustments until everything sits comfortably.

Once the fit looks right, you're ready to head outside and enjoy your next adventure together.

Back to blog